Graphtec CE6000-120E

---

De Graphtec CE6000 serie biedt u de beste kosten/prestatie verhouding ten opzichte van andere merken van snijplotters zoals snellere snijsnelheden en hogere snijkracht, hiermee hebt u de flexibiliteit om een breder scala van materialen te kunnen snijden.

De USB 2.0 full speed data-interface of RS232C seriële poort zorgt voor een betrouwbare verbinding met de computer, hetzij op een Mac of Windows-pc.

De CE6000 wordt geleverd met Graphtec Studio design software (Mac & Windows compatible) en de volledig nieuwe Cutting Master 3 Production Manager en een Plug-in voor de nieuwste versies van CorelDRAW ® en Adobe ® Illustrator.

Het nieuwe LCD bedieningspaneel biedt volledige controle over de in te stellen parameters waaronder acht voorgeprogrammeerde instellingen, evenals geavanceerde functies zoals tangentiaal modus, omlaag dwingen offset, pen up snelheid, messlijtage monitoring en meer.

Met de 25-pins RS-232C of de Full Speed USB 2.0-control interface is de CE6000 compatibel met bijna alle gangbare computersystemen.

---

 

ce6000 Series

 

Item	CE6000-40E	CE6000-60E / 60ES	CE6000-120E	CE6000-120AMO
CPU	32-bit CPU
Configuration	Grit rolling type, digital servo drive
Max. cutting area (Guaranteed cutting area)	375 mm x 50 m *1 (356 mm x 2 m *1)	603 mm x 50 m *1 (584 mm x 5 m *1)	1213 mm x 50 m *1 (1194 mm x 5 m *1)
Mark scanning margin	Type 1 mark: Front 15 mm, Rear 35 mm, Left/Right 15 mm Type 2 mark: Front 17 mm, Rear 37 mm, Left/Right 15 mm (Length of media up to 2 m)
Number of push roller	2 rollers	2 rollers	3 rollers	4 rollers
Max. cutting speed	600 mm/s (All directions)	900 mm/s (at 45º direction)	1000 mm/s (at 45º direction)
Max. acceleration	21.2 m/s2 (at 45º direction)		13.9 m/s2 (at 45º direction)
Max. cutting force (Instantaneous max. force)	2.94 N (300 gf) in 31 steps (3.2 N (330 gf))	4.41 N (450 gf) in 38 steps (4.9 N (500 gf))	4.41 N (450 gf) in 38 steps (4.9 N (500 gf))
Minimum character size	Approx. 5 mm alphanumeric (varies depending on character font and type of media)
Repeatability	Max. 0.1 mm in plot up to 2 m *1
Mountable number of tools	1 tool
Blade type	Supersteel
Pen type	Oil-based ballpoint, Water-based fiber-tip pen
Media type	Self-adhesive marking film (vinyl, fluorescent, reflective) excluding high-intensity reflective film, up to 0.25 mm thickness Polyester film, up to 0.25mm thickness (unguaranteed accuracy)
Perforation cutting	Yes (performed by force control)
Interface	RS-232C / USB2.0 (Full Speed)
Buffer memory	2 MB
Command sets	GP-GL / HP-GL™ emulation (Set by the menu or the command, and selects from GP-GL, HP-GL™, or Auto detect)
Display	Graphic type LCD with backlight (240dots x 128dots)
Registration mark sensing system	Scans the mark by optical sensor (ARMS5.0)
Power source	100 to 120, 200 to 240 V AC (Auto switch), 50 / 60 Hz
Power consumption	120 VA
Operating environment (Guaranteed accuracy)	10 to 35 ºC, 35 to 75 % R.H. (non-condensing) (16 to 32 ºC, 35 to 70 % R.H. (non-condensing))
External dimensions (W x D x H, Approx. [mm])	672 x 338 x 266	900 x 593 x 1046	1541 x 736 x 1250
Weight	10.5 kg	21 kg (including stand)	40.5 kg (including stand)
Included software *2	Windows Driver, Graphtec Studio, Cutting Master 3, Plotter Controller
Compatible OS *2	Windows 8 / 7 / Vista / XP, Mac OS 10.5.8 to 10.8
Compatible Standards	Safety: cUL / CE mark, EMC: VCCI Class A / FCC Class A / EN55022 Class A

*1

Operated with Graphtec specified cutting condition and the media. In long-length cutting, the basket is used.

*2

For more information about compatibility of the OS or application software, please check the Graphtec website or contact your local representative of Graphtec.

*

Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners. Specifications are subject to change without notice.

*

The CE6000 has different specifications by destination.