| Model |
FC9000-75 |
FC9000-100 |
FC9000-140 |
FC9000-160 |
Max. cutting area
(W x L) (*1) |
30 in x 164 ft
762 mm x 50 m |
42 in x 164 ft
1067 mm x 50 m |
54 in x 164 ft
1372 mm x 50 m |
64 in x 164 ft
1626 mm x 50 m |
| Guaranteed Precision Cutting Area (*1) |
29.21 in x 50 ft |
41 in x 32 ft
35.2 in x 50 ft |
53 in x 32 ft
35.2 in x 50 ft |
63 in x 32 ft
35.2 in x 50 ft |
| Mountable media width (*2) |
Min. 1.96 in
Max. 36.22 in |
Min. 1.96 in
Max. 48.19 in |
Min. 1.96 in
Max. 60.20 in |
Min. 1.96 in
Max. 72.83 in |
| Max. cross cut width |
30 in |
42 in |
54 in |
64 in |
| Number of push rollers |
2 rollers |
3 rollers |
4 rollers |
4 rollers |
| CPU |
32-bit CPU |
| Configuration |
Grit rolling plotter |
| Drive method |
Digital servo drive |
| Max. cutting speed |
58.5 inches per second (45 degree direction) 41.3 (axis direction) |
| Cutting force |
Max. 600 gf in 48 steps |
| Axial acceleration |
Max. 39.2 m/s2 (4 G) in 8 steps |
| Compatible roll media diameter |
Min. 2.99 in Max 7.8 in. (Max diameter is 6.29 in when included flange is installed) |
| Mechanical resolution |
0.005 mm |
| Programmable resolution |
GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm |
| Distance accuracy (*2) |
Max. 0.1 mm or 0.1 % of plotted length |
| Repeatability (*2) |
Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media) |
| Minimum character size |
Approx. 5 mm alphanumeric (varies depending on character font and media) |
| Mountable number of tools |
1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed |
| Blade types |
Supersteel (0.9 mm or 1.5 mm diameter) |
| Pen types |
Water-based fiber-tip pen, Oil-based ballpoint pen |
| Pouncing tool type |
Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12) |
| Media types (*3) |
Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,Automotive protection and window tinting film, Sandblast resist rubber up to 1 mm thick |
| Compatible paper for pouncing |
Regular paper from 0.06 to 0.13 mm thick |
| Cross-cutter |
Built into the tool carriage |
| Perforation cutting |
Supported (performed by force control) |
| Interface |
USB 2.0(Full Speed), Ethernet 10BASE-T/100BASE-TX |
| Buffer memory |
2 MB |
| Command sets |
GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select) |
| Condition settings |
Dual configuration (save two (2) user settings with eight (8) separate condition settings per user) |
| Display |
Graphic type LCD (3.7-inch, backlight) |
| Power source |
100 V to 240 V AC, 50 / 60 Hz |
| Power consumption |
AC100-240 V, 50/60 Hz |
| Operating environment |
50 to 95 ºF, 35 to 75 % R.H. (non-condensing) |
| Guaranteed accuracy environment |
60 to 89 ºF, 35 to 70 % R.H. (non-condensing) |
External dimensions
(W x D x H) |
50" x 28" x 48"
1270 x 711 x 1219 mm |
61.8" x 28" x 48"
1570 x 715 x 1219 mm |
73.6" x 28" x 48"
1870 x 711 x 1219 mm |
84" x 28" x 48"
2133 x 711 x 1219 mm |
| Weight (*8) |
108 lbs. |
123 lbs. |
141 lbs.
178 lbs. /w take-up |
154 lbs.
195 lbs. /w take-up |
| Included Software (*6) |
Graphtec Studio 2, Cutting Master 5 Plug-in for Windows and Mac |
| Compatible OS (*5) |
Windows 11 /10 / 8.1 / 64-bit editions & MacOS 10.2 (Sierra) to 13 (Ventura) |
| Warranty |
3 YEAR WARRANTY |
| Safety |
PSE, UL/cUL, CE mark) |
| EMC |
VCCI Class A, FCC Class A, CE mark |
Transferpersen
Schulze
Snijplotters
graphtec-brochure-fc9000.pdf